Why is sewage different from clean water?
Sewage carries bacteria, viruses and other waste, and it leaves a residue that clings to porous materials. Those materials cannot be cleaned to a safe standard, so they have to be removed. Hard surfaces can be disinfected and kept.
Drywall, carpet, pad and insulation absorb water and the contaminants in it. Once they are wet with sewage, they hold the contamination inside their fibers, and cleaning the surface does not reach what is inside. Removing them is the only dependable way to clear the room.
Hard surfaces such as tile, sealed wood, metal and vinyl can be cleaned and disinfected. The crew uses a cleaner first to remove the residue and then a disinfectant to kill what is left. The surfaces are rinsed and allowed to dry before anything is placed back in the room.
Is it safe to clean a sewage backup myself?
A small spill on a hard surface can be cleaned with gloves, a mask and a disinfectant, but a backup that reaches porous materials or a wide area needs a trained crew. Contact with the water carries real risk, and the cleanup can spread contamination if it is done carelessly.
Wear rubber gloves, eye protection and a mask rated for the job, and keep children and pets away from the room. Do not run fans in the room, because they can spread the contamination through the air. Keep the door closed and the area ventilated.
Bleach mixed with ammonia or with other cleaners produces toxic gas, so never combine cleaning products. Read the labels, use one product at a time and keep the room ventilated. If the water reached porous materials, call a crew rather than trying to clean them yourself.
Why does a backup happen when it rains?
Heavy rain can push more water into the drain system than it can carry, and the water can come back up through the lowest fixtures. Homes in the low parts of the county and in the hills can both see water return when the flow is heavy.
A drain system carries wastewater and runoff in shared pipes, and during a storm those pipes can fill faster than they empty. The water has nowhere to go but back up through the nearest open connection, which is often a floor drain or a fixture in the lowest room of the house.
A backflow valve is a device that stops water from returning into a building. Whether a home has one, and whether it works, is a question for a plumber. The crew notes the presence of any valve in its report, but it does not install or test one.
What records should I keep after a backup?
Keep photographs of the water and the fixtures, the crew's removal and disinfection log, and the plumber's report on the drain. Those records show what was damaged, what was cleaned and what caused the backup.
Take photographs before anything is removed, and note the time you first saw the water. Keep the bags of removed material separate and note what was in each one, because insurers often ask what was discarded and why.
The plumber's report should say where the blockage or the failure was found and what was repaired. The crew's log says what was done to the building, and the two documents together show the cause and the cleanup. Keep both in one folder.