Why does moisture in a crawl space affect the whole house?
Air moves from the crawl space up through the floor and the walls, so wet air and damp wood at the bottom of the house reach the rooms above. The moisture can make the floor soft, spread mold and draw odor into the living space.
Warm air in the house rises and pulls air up from below through every gap in the floor. A crawl space that holds moisture supplies that air, and the humidity can rise through the subfloor and into the rooms over it. The effect is strongest in the morning, when the air is cool and the moisture settles.
Wet joists also lose strength. A joist that stays damp for months can soften and attract decay, and a floor that sags over it may need repair. The crew reads the joists for softness and records any that have changed, so the homeowner and any contractor know where to look.
Do I need a vapor barrier or a sump?
Whether a space needs a barrier or a pump depends on where the water comes from and how the ground drains. A technician can judge that on site, and the decision should follow the readings rather than a general rule.
A vapor barrier is a sheet laid over the ground that slows moisture rising from the soil. Where the ground is wet, a barrier can reduce the moisture that reaches the joists. The condition of an existing barrier is checked during the work, and a torn or missing sheet is noted in the log.
A sump is a pit that collects water and pumps it out. It is useful when water flows toward a low corner of the space, but it is only as good as its discharge route. The crew checks whether a sump exists and whether it works, and it does not install one as part of drying.
How do I find out whether my crawl space has water in it?
Look through the access panel with a flashlight, check the corners for standing water or soft mud, and smell the air. A moisture meter on the joists gives a clearer answer than a visual check.
Do not enter a crawl space alone or without light. Check the ground for shine or dark patches, the foundation wall for water lines, and the insulation for wet or matted sections. Photograph what you see before anything is touched.
If the floor above feels soft or the air smells damp, call a crew to read the space. A crew can find moisture that a flashlight will miss, and the readings show whether the space is still wet or has dried since the last rain.
What does the drying plan for a crawl space look like?
The plan starts with pumping and removing the wet material, then sets air movers and a dehumidifier to dry the joists and subfloor. The space is closed only when the readings meet the dry targets for the framing above.
Air movers are placed to move air across the joists and along the ground, and the dehumidifier is run through the access opening or a vent. The room above is watched for changes in the floor and the walls while the drying runs, because the moisture can move into the house.
The crew repeats the readings each visit and records the change. Once the framing is dry, the crew removes its equipment and leaves the log. A homeowner who plans to repair the vapor barrier or add ventilation can use the record to decide on the next step.